This section outlines the basic operational procedures involved in obtaining data in Contact Mode.
The 100 μm wide-legged cantilever on the SiN substrate is the first choice for Contact mode imaging of most samples. If the image degrades rapidly because the tip damages the sample surface, switch to a cantilever with a lower spring constant. Refer to the Probe Selection and Handling for more detailed information.
www.bruker.com | Bruker Corporation |
www.brukerafmprobes.com | 112 Robin Hill Rd. |
nanoscaleworld.bruker-axs.com/nanoscaleworld/ | Santa Barbara, CA 93117 |
Customer Support: (800) 873-9750 | |
Copyright 2010, 2011. All Rights Reserved. |